Freelancer logo How It Works Browse Jobs
Log In Sign Up
Post a Project
EXPLORE
Arduino
C Programming
Electronics
Microcontroller
PCB Layout
Profile cover photo
You're now following
Error following user.
This user does not allow users to follow them.
You are already following this user.
Your membership plan only allows 0 follows. Upgrade here.
Successfully unfollowed
Error unfollowing user.
You have successfully recommended
Error recommending user.
Something went wrong. Please refresh the page and try again.
Email successfully verified.
User Avatar
$30 USD / hour
Flag of INDIA
ahmedabad, india
$30 USD / hour
It's currently 4:00 AM here
Joined October 30, 2018
2 Recommendations

Jitendra Z.

@jitendracf

annual-level-two.svg
verified-v2.svg
 5.0 (16 reviews)
5.6
5.6
100%
100%
$30 USD / hour
Flag of INDIA
ahmedabad, india
$30 USD / hour
100%
Jobs Completed
100%
On Budget
100%
On Time
21%
Repeat Hire Rate

Embedded | Firmware | PCB | IoT | BLE | WiFi | GPS

12+ years of experience in embedded products design and development. Key skills: • Hardware Design • Firmware development • Wireless Technologies Expert (IoT products development using WiFi(2.4GHz, 5GHz, 6GHz), BLE, Cellular(2G/3G/4G/LTE,NB-IOT), GPS/GNSS, ZigBee, LoRa, UWB etc.) Embedded Systems Expertise: • PCB design upto Six Layers • Altium Designer, Cadsoft Eagle, Kicad • Requirement analysis and research • Firmware development on micro-controllers/microprocessors • Micro-controllers/processors • Wireless drivers and applications for WiFi, RF, BLE, GSM/GPS, LTE, NB-IOT, RFID, NFC, LoRa • Hands on experience on I2C, SPI, UART/USART, RS232, RS485, CAN, TCP/IP, J1772 • IOT product development • Hands on experience using Raspberry Pi zero/2/3/4 • Sensors integration • Vehicle Health System using OBD-II • Embedded C, C++, Python and Shell Scripting • Windows, Linux, TI-RTOS, TI-SIMPLELINK, Free RTOS, Zephyr RTOS, AWS Free RTOS • Microvision Keil, Code Composer Studio, IAR Workbench for 8051 and ARM, Avr Studio, MPLABx IDE, nRF Studio, Arduino IDE, Segger Embedded Studio, Simplicity studio, VS Code • Hands on development experience in Arduino, ESP-IDF, NRF Connect SDK, TI BLE SDK etc. • BLE and Wi-Fi based products development Wireless Socs Experience: • CC2530, CC2540,CC2541, CC2640,CC2650, CC2640R2F, CC430, CC1100, CC1101 • nRF51822,nRF51844, nRF52832,nRF52840,nRF9160,nRF52810, nRF52820, nRF5340, nRF52833 • nRF905, BL600, CSR8670 • CC3100, CC3200 • ESP8266-EX, ESP32-S2, ESP32-S3,ESP32-C6 Sensors Integration and Peripherals Experience : • Infrared sensor, Proximity sensor • Temperature sensor, Humidity sensor, Pressure sensor • Accelerometer, Gyroscope • CO2 sensor, Soil moisture sensor, Loadcell sensor • Heart rate sensor • Matrix Keypad, Dot-matrix Display, LCD, OLED display, TFT display • Water Flow sensor • Light sensor • Occupancy sensor Evaluation Boards Experience : • Raspberry Pi Zero/2/3/4 • Beaglebone black • Olinuxino A10 • STM32F discovery board • PIC32F development board • CC2640R2F EVM, CC2650 EVM • Firefly RK3288 development board • Arduino Uno, Atmega256 development board • ESP32-WROOM Development Kit, ESP12F development kit, Argon Development board, nRF52832-DK, nRF52833-DK, nRF52840-DK, ESP32-S3 Dev Kit
Freelancer Electronics Engineers India
See all Electronics Engineers in India

Contact Jitendra Z. about your job

Log in to discuss any details over chat.

Portfolio

6454753
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
6454741
This PCB has been designed to control compressor automatically. It has capability to get outer temperature data in form of ADC , and operate(turn ON/OFF) compressor based on temperature readings. There are LED indication for compressor running status with inputs.
Automatic Compressor Controller
This PCB has been designed to control compressor automatically. It has capability to get outer temperature data in form of ADC , and operate(turn ON/OFF) compressor based on temperature readings. There are LED indication for compressor running status with inputs.
Automatic Compressor Controller
4529128
It is an Embedded Solution which can be used with PLC device to convert its editable test reports (i.e. csv files) to non-editable test reports(i.e. pdf etc.) with proper formats. - Raspberry PI acts as an access point. It has its own web server with rich GUI and gives user friendly interface. - User can connect to access point and download non editable reports using GUI. - Device also takes backup of reports automatically and gives indication on memory exceptions.
PLC Data Report Generation - Wireless
4529113
- Webserver is the product which would monitor and control your remote units/ equipmentsusing web interface. - Webserver is an advanced yet simplified Remote Terminal Unit and running inside a simple microcontroller. - Taking advantage of the reliable, internet, webserver device becomes a remotely accessible unit from any part of the world. - Webserver device comprised of Microchip TCP/IP stack and in addition it also contains a Modbus TCP server. - The inputs present on Webserver device can be used for monitoring of external devices or connecting sensors (digital). - Alarm conditions can be configured using a simple web interface for monitoring of these inputs. - Webserver also gives you the freedom to control the states of the connected outputs using web browser. - IDE Used : Mplab X IDE
Webserver - Monitoring and Control
4529105
This is an Internet of Things (IOT) where a microcontroller device was interfaced with multiple sensors like temperature, water level, humidity etc. -The controller module has a 3G GSM module interfaced which provides the high speed internet connectivity. Controller will collect the data from sensors and upload all the data to cloud. -Cloud is a live server which collects data from different controllers which are on the field. Cloud provides functionality to view the data on charts, tables, sorting of data, alert system, device configuration. -It has a Bluetooth connectivity over which it can communicate with a mobile device for troubleshooting and configuration. I have designed complete prototype which includes: - Component selection - Schematic and pcb layout design - Firmware development EDA Tool: Cadsoft eagle IDE: MPLabx, IAR Workbench for 8051
Smart Data Logger
This is an Internet of Things (IOT) where a microcontroller device was interfaced with multiple sensors like temperature, water level, humidity etc. -The controller module has a 3G GSM module interfaced which provides the high speed internet connectivity. Controller will collect the data from sensors and upload all the data to cloud. -Cloud is a live server which collects data from different controllers which are on the field. Cloud provides functionality to view the data on charts, tables, sorting of data, alert system, device configuration. -It has a Bluetooth connectivity over which it can communicate with a mobile device for troubleshooting and configuration. I have designed complete prototype which includes: - Component selection - Schematic and pcb layout design - Firmware development EDA Tool: Cadsoft eagle IDE: MPLabx, IAR Workbench for 8051
Smart Data Logger
4529099
The main objective of this product was to build smart OBD (On-Board Diagnostic) device which can be used in automobile industry. This is a step for autmobile industry towards IOT. This device comprises of: -MCU - communicate with car on CAN Bus and gathers car's health i.e. engine temperature, speed, torque, oxygen sensor data, fuel data, pressure data and many more.. - Bluetooth - communicate with mobile app to send car's data - GSM - to send data to servers using http - GPS - to get car's real-time location - SD card - to store data offline in csv I have developed this prototype from component selections to pcb layout and firmware development. EDA Tools: Cadsoft eagle and Altium Desinger, Gerbview IDE: MPLab X, Code composer studio
OBD-II device with BLE, GPS and GSM
The main objective of this product was to build smart OBD (On-Board Diagnostic) device which can be used in automobile industry. This is a step for autmobile industry towards IOT. This device comprises of: -MCU - communicate with car on CAN Bus and gathers car's health i.e. engine temperature, speed, torque, oxygen sensor data, fuel data, pressure data and many more.. - Bluetooth - communicate with mobile app to send car's data - GSM - to send data to servers using http - GPS - to get car's real-time location - SD card - to store data offline in csv I have developed this prototype from component selections to pcb layout and firmware development. EDA Tools: Cadsoft eagle and Altium Desinger, Gerbview IDE: MPLab X, Code composer studio
OBD-II device with BLE, GPS and GSM
6454753
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
The main function of this project was to control appliances using capacitive touch buttons and send status to server using MQTT over WiFi(ESP32). The board is powered from 230V AC and all the appliances are rated 210-240 V AC,20 Amps.There are three PCBs stack to reduce form factor of device. Dimension was 40mm x 40mm.
4 Gang Switch
6454741
This PCB has been designed to control compressor automatically. It has capability to get outer temperature data in form of ADC , and operate(turn ON/OFF) compressor based on temperature readings. There are LED indication for compressor running status with inputs.
Automatic Compressor Controller
This PCB has been designed to control compressor automatically. It has capability to get outer temperature data in form of ADC , and operate(turn ON/OFF) compressor based on temperature readings. There are LED indication for compressor running status with inputs.
Automatic Compressor Controller
4529128
It is an Embedded Solution which can be used with PLC device to convert its editable test reports (i.e. csv files) to non-editable test reports(i.e. pdf etc.) with proper formats. - Raspberry PI acts as an access point. It has its own web server with rich GUI and gives user friendly interface. - User can connect to access point and download non editable reports using GUI. - Device also takes backup of reports automatically and gives indication on memory exceptions.
PLC Data Report Generation - Wireless
4529113
- Webserver is the product which would monitor and control your remote units/ equipmentsusing web interface. - Webserver is an advanced yet simplified Remote Terminal Unit and running inside a simple microcontroller. - Taking advantage of the reliable, internet, webserver device becomes a remotely accessible unit from any part of the world. - Webserver device comprised of Microchip TCP/IP stack and in addition it also contains a Modbus TCP server. - The inputs present on Webserver device can be used for monitoring of external devices or connecting sensors (digital). - Alarm conditions can be configured using a simple web interface for monitoring of these inputs. - Webserver also gives you the freedom to control the states of the connected outputs using web browser. - IDE Used : Mplab X IDE
Webserver - Monitoring and Control
4529105
This is an Internet of Things (IOT) where a microcontroller device was interfaced with multiple sensors like temperature, water level, humidity etc. -The controller module has a 3G GSM module interfaced which provides the high speed internet connectivity. Controller will collect the data from sensors and upload all the data to cloud. -Cloud is a live server which collects data from different controllers which are on the field. Cloud provides functionality to view the data on charts, tables, sorting of data, alert system, device configuration. -It has a Bluetooth connectivity over which it can communicate with a mobile device for troubleshooting and configuration. I have designed complete prototype which includes: - Component selection - Schematic and pcb layout design - Firmware development EDA Tool: Cadsoft eagle IDE: MPLabx, IAR Workbench for 8051
Smart Data Logger
This is an Internet of Things (IOT) where a microcontroller device was interfaced with multiple sensors like temperature, water level, humidity etc. -The controller module has a 3G GSM module interfaced which provides the high speed internet connectivity. Controller will collect the data from sensors and upload all the data to cloud. -Cloud is a live server which collects data from different controllers which are on the field. Cloud provides functionality to view the data on charts, tables, sorting of data, alert system, device configuration. -It has a Bluetooth connectivity over which it can communicate with a mobile device for troubleshooting and configuration. I have designed complete prototype which includes: - Component selection - Schematic and pcb layout design - Firmware development EDA Tool: Cadsoft eagle IDE: MPLabx, IAR Workbench for 8051
Smart Data Logger
4529099
The main objective of this product was to build smart OBD (On-Board Diagnostic) device which can be used in automobile industry. This is a step for autmobile industry towards IOT. This device comprises of: -MCU - communicate with car on CAN Bus and gathers car's health i.e. engine temperature, speed, torque, oxygen sensor data, fuel data, pressure data and many more.. - Bluetooth - communicate with mobile app to send car's data - GSM - to send data to servers using http - GPS - to get car's real-time location - SD card - to store data offline in csv I have developed this prototype from component selections to pcb layout and firmware development. EDA Tools: Cadsoft eagle and Altium Desinger, Gerbview IDE: MPLab X, Code composer studio
OBD-II device with BLE, GPS and GSM
The main objective of this product was to build smart OBD (On-Board Diagnostic) device which can be used in automobile industry. This is a step for autmobile industry towards IOT. This device comprises of: -MCU - communicate with car on CAN Bus and gathers car's health i.e. engine temperature, speed, torque, oxygen sensor data, fuel data, pressure data and many more.. - Bluetooth - communicate with mobile app to send car's data - GSM - to send data to servers using http - GPS - to get car's real-time location - SD card - to store data offline in csv I have developed this prototype from component selections to pcb layout and firmware development. EDA Tools: Cadsoft eagle and Altium Desinger, Gerbview IDE: MPLab X, Code composer studio
OBD-II device with BLE, GPS and GSM

Reviews

Changes saved
Showing 1 - 5 out of 16 reviews
Filter reviews by:
5.0
₹2,000.00 INR
ESP32 Program
Jitendra is good at this work. Definitely recommended and work for my future projects.
C Programming
C++ Programming
User Avatar
Flag of Ajay Ramprasad M.
@indigilog1
•
5 months ago
5.0
$200.00 USD
ATMEGA328PB with GPS
An absolute pleasure working with Jitendra. Highly professional and communicates constantly progress. I look forward to working with him again.
Electronics
Microcontroller
Arduino
R
Flag of Robert C.
@robert384
•
3 years ago
5.0
€200.00 EUR
Project for Jitendra Z.
Jitendra work very well, I recommande for all people. He is a good professional and polite. Sure we work more toghether.
C Programming
Electronics
Microcontroller
Electrical Engineering
+1 more
M
Flag of Manel R.
@manel87
•
4 years ago
5.0
£120.00 GBP
Fix an Arduino Library
Excellent freelancer, worked very quickly and efficiently. He claimed to understand the issue when he bid, he was absolutely spot on and fixed all my issues without a hitch - would hire again for sure
C Programming
Electronics
Microcontroller
Electrical Engineering
Arduino
User Avatar
Flag of Josh E.
@Joshmeasurable
•
4 years ago
5.0
$650.00 USD
CCTALK Circuit Design and PCB layout
Jitendra is very professional and produced high quality work. I would highly recommend him and will be using him for future projects.
Electronics
Microcontroller
Electrical Engineering
PCB Layout
Circuit Design
Q
Flag of Jeff K.
@questinfo2
•
4 years ago

Experience

Tech Lead

CoreFragment Technologies Pvt Ltd
Jul 2015 - Present
Responsibilities: - Client Handling - Client Communication - Requirement Understanding - Team management - Project Execution (Hardware Design) - Firmware Development if required.

Sr. Embedded Engineer

Saltriver Infosystems Pvt Ltd
May 2011 - Jun 2015 (4 years, 1 month)
Responsibilities: - Client Handling - Client Communication - Requirement Understanding - Team management - Project Execution

Education

B.Tech

India 2007 - 2011
(4 years)

Qualifications

Developer of the year

Saltriver Infosystems Pvt Ltd
2013
I have been honored as best developer of the year.

Contact Jitendra Z. about your job

Log in to discuss any details over chat.

Verifications

Preferred Freelancer
Identity Verified
Payment Verified
Phone Verified
Email Verified
Facebook Connected

Certifications

c-prog-3.png C Programming 3 75%

Top Skills

Electronics 15
Microcontroller 15
Arduino 11
C Programming 9
PCB Layout 6

Browse Similar Freelancers

Electronics Engineers in India
Electronics Engineers
Microcontroller Developers
Arduino Engineers

Browse Similar Showcases

Electronics
Microcontroller
Arduino
C Programming
Previous User Next User
Invite sent successfully!
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Freelancer logo US (International) / English Help & Support Freelancer Categories Projects Contests Freelancers Enterprise Membership Preferred Freelancer Program Project Management Local Jobs Photo Anywhere Showcase API for Developers Get Verified Desktop App About About us How it Works Security Investor Sitemap Stories News Team Awards Press Releases Careers Terms Privacy Policy Terms and Conditions Copyright Policy Code of Conduct Fees and Charges Partners Escrow.com Loadshift Warrior Forum Apps Apple App Store logoGoogle Play logo
Copy to clipboard failed, please try again after adjusting your permissions.
Copied to clipboard.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.